PRODUCT DESCRIPTION

IPS-S2 motor controller that integrates infrared/radio freguency/WlFl/ buton control, mainly used to control electric linealactuators. The controller is compatible with voltage of DC9V~29V, maximum current of 7A. The positive and negativepoles need to be wired according to the wiring diagram. lf the positive and negative connections are not correct, it will notburn the controller. For example, 60W linear actuator, please choose 60-90W power adapter/switch power supply. lf usesmaller power, the motor will not working. The controller can be used to control various specifications of electric linearactuators. WlFl module can be controlled through the "eWeLink" APP, and only supports 2.4G WiFl. There are 6 buttonsK1, K2, K3, B1, B2, L on the controller for adiusting various functions. Please refer to the following for detailedinstructions. The B1 B2 button controls the forward and backward movement of the motor; The L button learns WlFl.

TECHNICAL PARAMETERS

Model	IPS-S2
Input Voltage	DC 9V-29V
Output Voltage	DC 9V-29V
Maximum Current	20A
Receiving Frequency	RF433MHz
WIFI Standard	Wi-Fi 2.4ghz b/g/n
Remote Control Battery	23A12V
Working Temperature	-20°C~+70°C
Storage Temperature	-20°C~+90°C
Working Humidity	<80%
Key Mode	Press Once Continuous Work

DIMENSION

WIRING INSTRUCTIONS

THE MAIN FUNCTIONS

1. Controller buton control: Press the B1 button to up and the B2 button to down, lf not correct, please switch toconnecting the motor cable.

2. RF433 remote control: lt can be adapted to the RF433 remote control (with three buttons for forward, pause, andbackward), and one controller can be equipped with 8 remote controls. (Provide 1 remote control by default)

3. Infrared remote control: Each infrared remote control can be controlled

4. Manual controller: optional with 2.5 meter manual controller for control (press move)/optional with foot controller forcontrol(press move)

5. WlFl control: You can use the L button to connect 2.4G WlFl for lifting control. (First time adapting to WlFl, pleaseapproach the router)

6.Button control: Can be controlled using industrial button switches

7. Current limiting control: Set the maximum current of the controller through the K1 buton. When the motor exceeds thecurrent, the motor wil stop

FUNCTION INTRODUCTION
A	Up Current Limit	Press the K1 button for 3 seconds to enter the setting Press the K2 and K3 buttons to adiust the maximum current for the upworking of the motor
B	Down Current Limitr	Press the K1 button again. Press the K2 and K3 buttons to adiust the maximum current for the Downworking of the motor
C	Time Limit	Press the K1 button again Press the K2 and K3 buttons to adjust the maximum Time for the working otthe motor