Electric Lifting Column Desk Legs: the difference between Forward Installation and Inverted Installation

The main difference between forward and inverted installation of electric lifting column desk legs is the orientation and fixing method of the outer tube, which will affect the appearance, stability and installation method of the electric desk legs.

Forward Installation (Direct Installation)

● The telescopic joint faces upward: The thinner telescopic joint is located above and gradually becomes thicker, that is, the outer tube is at the bottom.
● Fixing method: It is usually fixed to the desktop by the mounting plate on the top, and the foot pads on the bottom contact the ground.
● Appearance: Visually more in line with the traditional desk legs, extending upward from thick to thin lines.
● Stability: The bottom contact area of the forward electric desk legs (thick bottom and thin top) is larger, providing better stability. This design helps reduce the shaking of the desk during lifting, especially when lifting to a higher position.
● Installation: The installation of electric lifting column is relatively direct, just fix the mounting plate to the bottom of the desktop.

Inverted Installation (Reverse Installation)

● The telescopic joint faces down: The thicker telescopic joint is located above and gradually becomes thinner, that is, the outer tube is on top.
● Fixing method: It is usually fixed to the desktop by the mounting plate on the top, and the foot pads on the bottom contact the ground.
● Appearance: It may appear more stable visually with a lower center of gravity. Some designs will deliberately use the characteristics of inverting to make the thick upper structure part of the design.
● Stability: The inverted desk legs (thin bottom and thick top) have a large contact area on the desk. Although it may provide better left and right stability of the desk, the overall stability during the lifting process may be slightly inferior to the forward desk legs.
● Installation: The installation method is similar to that of the forward, and the installation board is fixed to the bottom of the desktop.

Summarize:

In terms of stability, Inverted Installation is usually more stable. The installation method of forward and inverted installation is similar, both of which must be fixed to the bottom of the desktop. As for the appearance, this is a subjective preference, forward installation is more traditional, and inverted installation may be more modern or industrial. The cost issue that everyone is concerned about is generally not much different from forward and inverted installation, which mainly depends on the specific model and function.

Therefore, when choosing a electric lifting column, in addition to considering the forward and inverted electric desk legs, other factors should also be considered, such as lifting range, load-bearing capacity, lifting speed, desk board material, etc., to choose the lifting desk that is most suidesk for your needs.

In short, although forward and inverted installation of the legs of the lifting desk will have a certain impact on the use of the lifting desk, these effects may not be significant. When choosing Electric desk legs, you should consider various factors in order to choose the lifting desk that best suits your needs.