- Please select your languages, order to get all infomation that you need
- English العربية Le français Deutsch lingua italiana 日本語 한국어 Português (Portugal, Brasil) русский Español
Model: IPS-HS1
For Motor Qty:1-4 PCS
Input Voltage: DC24~36V
Output Voltage: DC24V
Power: 6-16A Max 400W
| Model | IPS-HS1 | For Motor Qty | 1-4 PCS |
| Input Voltage | DC24~36V | Working Temperature | -20°C-40°C |
| Output Voltage | DC24V | Working Humidity | 20%-90% |
| Power | 320W Max 10A | Storage Temperature | -20°C~90°C |
| Receiver | Rs485/RF433/IO | Other Functions | Location memory and display |
| Controller Type | Hall 6-Wire Control | Key Mode | Press Continuous |
| Optional Functions | 2.5 meter spring wire manual controller / Sensor Switch/PLC | ||
Note: You need to consult us before you can modify the controller, Please do not modify randomly, it wil cause the electric actuator damage. You Need to record every value (n01-n12) before modification
1. Press the'S, 1,2, 3' buttons in sequence to enter the settings
2. RST malfunction occurs, please press the '' button to reset
3. To use sensor control, please press 'S, 3, 2, 1' to enter the settings
4. After setting the parameters, please press 'S' for 3 seconds to save
Error code ‘rst’.
Please press the ‘V’ key, and it cannot be released. The motor drops to the bottom and rebounds again. The screen will display ‘0', release the V key.
Reset successfully.
