PRODUCT DESCRIPTION

IPS-S2 motor controller that integrates infrared/radio freguency/WlFl/ buton control, mainly used to control electric linealactuators. The controller is compatible with voltage of DC6V~30V, maximum current of 10A. The positive and negativepoles need to be wired according to the wiring diagram. lf the positive and negative connections are not correct, it will notburn the controller. For example, 60W linear actuator, please choose 60-90W power adapter/switch power supply. lf usesmaller power, the motor will not working. The controller can be used to control various specifications of electric linearactuators. WlFl module can be controlled through the "eWeLink" APP, and only supports 2.4G WiFl. There are 6 buttonsF1, F2, F3,▲ , ▼, on the controller for adiusting various functions. Please refer to the following for detailedinstructions. The ▲▼ button controls the forward and backward movement of the motor; The  button learns WlFl.

TECHNICAL PARAMETERS

Model	IPS-S2
Input Voltage	DC 6V-30V
Output Voltage	20~93% Input Voltage Adjustable
Maximum Current	10A
Receiving Frequency	RF433MHz
WIFI Standard	Wi-Fi 2.4ghz  IEE802.11 b/g/n
Remote Control Battery	23A12V
Working Temperature	-20°C~+70°C
Storage Temperature	-20°C~+90°C
Working Humidity	<80%
Key Mode	Press Once Continuous Work

DIMENSION

WIRING INSTRUCTIONS

THE MAIN FUNCTIONS

1. Controller buton control: Press the F1 button to up and the F2 button to down, lf not correct, please switch toconnecting the motor cable.

2. RF433 remote control: lt can be adapted to the RF433 remote control (with three buttons for forward, pause, andbackward), and one controller can be equipped with 8 remote controls. (Provide 1 remote control by default)

3. Infrared remote control: Each infrared remote control can be controlled

4. Manual controller: optional with 2.5 meter manual controller for control (press move)/optional with foot controller forcontrol(press move)

5. WlFl control: You can use the L button to connect 2.4G WlFl for lifting control. (First time adapting to WlFl, pleaseapproach the router)

6.Button control: Can be controlled using industrial button switches

7. Current limiting control: Set the maximum current of the controller through the F1 buton. When the motor exceeds thecurrent, the motor wil stop

Remove the lid and find a small circuit board, see Figure 1

Click the white remote control matching button and the indicator light illuminates,Click any key of the remote control to match automatically. 

Press the up and down keys of the remote control to test.

There are two ways to clear the code depending on the batch:

Plan ①: Click the matching button 8 times, until the indicator light flashes and ends--unbind

Plan ②: Press the matching button and do not release it. Wait for 8-10 seconds until the indicator light flashes - unbinding