PRODUCT DESCRIPTION

This is a special operation control module for single shaft stepping motor.A variety of fixed operation modes are built inthe module, and users can quickly select the appropriate motion track. The distance / speed / delay / number of cyclescan be saved and set after power down, it can run independently as a module, or it can be used together with othersystems. lt can be used in general industrial control occasions, not in special industries such as medical treatment andfire protection or life-threatening fields.

TECHNICAL PARAMETERS

Model	IPS-C13
Adaptive motor	Stepping Motor
Number Of Control Axes	Single Axis
Motor Signal	Common Cathode
Power Supply Range	DC 10-30V General
DrivingCapacity	4A
Instruction Features	Streamline and optimize multiple common instructions
Acceleration and deceleration control	Yes
Input reverse connection protection	Yes
Remote communication control	TTL Serial Port
Main Functions Of The System	Automatic, Manual, Setting And Serial Port Control
Speed Range	0.1~999 laps/ min
Number Of Forward Rotation Pulses	1-9999999 pulses
Number Of Reverse Pulses	1-9999999 pulses
Number Of Cycles	1-9999
Forward Rotation Delay Time	0.0-999.9 seconds
Reverse Delay Time	0.0-999.9 seconds
Subdivision Delection Range	1-128 subdivision
Product Service Environment	-50C-600C(no condensation)

DIMENSIONS

WIRING INSTRUCTIONS

PRODUCT FUNCTION

INTERFACE FUNCTION INTRODUCTION AND OPERATION METHOD

The controller is divided into two interfaces: operation+ interface+[ F ] menu setting interface

RUN INTERFACE
Used to display running information during work

MENU SETTING INTERFACE

In actual work,the parameters that need to be modifiedare all concentrated here